New products
New products
Slim miniboiler Atlantic O`Pro
The miniboiler is primarily designed to bring hot water as close as possible to the place of consumption (for example, to the sink in the kitchen).
- Submersible heater
- Capillary thermostat
- Thermoregulator button brought out
- Magnesium anode for corrosion protection
- For additional corrosion protection, an ohmic resistor between the thermos and the immersion heater
- The inner surface of the thermos is enamelled
- Thermos insulated with highly compressed polyurethane foam
- Safety valve for the cold water inlet and insulating sleeve for the hot water outlet
- Power cable 1.5m
ATLANTIC boilers require the first maintenance after the end of the warranty period, depending on the water quality, every 1-2 years: magnesium anode check and/or replacement; inspection of the heater and, if necessary, cleaning from scale.
The 30 L miniboiler belongs to the family of boilers equipped with the O`Pro corrosion protection system: The ohmic resistor equalizes the potentials of the heater and the inner vessel - the magnesium anode protects both the heater and the inner vessel equally!
Water connection
On the left is a non-pressurized connection (use a special device, see the installation manual for details), on the right is a connection as a pressure boiler.
You might like it too
